Long-Range Uniform Deposition of Ag Nanoseed on Cu Current Collector for High-Performance Lithium Metal Batteries.

Uniform lithium deposition is essential to hinder dendritic growth. Achieving this demands even seed material distribution across the electrode, posing challenges in correlating the electrode's surface structure with the uniformity of seed material distribution. In this study, the effect of periodic surface and facet orientation on seed distribution is investigated using a model system consisting of a wrinkled copper (Cu)/graphene structure with a [100] facet orientation. A new methodology is developed for uniformly distributed silver (Ag) nanoparticles over a large area by controlling the surface features of Cu substrates. The regularly arranged Ag nanoparticles, with a diameter of 26.4 nm, are fabricated by controlling the Cu surface condition as [100]-oriented wrinkled Cu. The wrinkled Cu guides a deposition site for spherical Ag nanoparticles, the [100] facet determines the Ag morphology, and the presence of graphene leads to spacings of Ag seeds. This patterned surface and high lithiophilicity, with homogeneously distributed Ag nanoparticles, lead to uniform Li+ flux and reduced nucleation energy barrier, resulting in excellent battery performance. The electrochemical measurements exhibit improved cyclic stability over 260 cycles at 0.5 mA cm-2 and 100 cycles at 1.0 mA cm-2 and enhanced kinetics even under a high current density of 5.0 mA cm-2 .

Synergistic Effect of Cu2 O Mesh Pattern on High-Facet Cu Surface for Selective CO2 Electroreduction to Ethanol.

Although the electroconversion of carbon dioxide (CO2 ) into ethanol is considered to be one of the most promising ways of using CO2 , the ethanol selectivity is less than 50% because of difficulties in designing an optimal catalyst that arise from the complicated pathways for the electroreduction of CO2 to ethanol. Several approaches including the fabrication of oxide-derived structures, atomic surface control, and the Cu+ /Cu interfaces have been primarily used to produce ethanol from CO2 . Here, a combined structure with Cu+ and high-facets as electrocatalysts is constructed by creating high-facets of wrinkled Cu surrounded by Cu2 O mesh patterns. Using chemical vapor deposition graphene growth procedures, the insufficiently grown graphene is used as an oxidation-masking material, and the high-facet wrinkled Cu is simultaneously generated during the graphene growth synthesis. The resulting electrocatalyst shows an ethanol selectivity of 43% at -0.8 V versus reversible hydrogen electrode, which is one of the highest ethanol selectivity values reported thus far. This is attributed to the role of Cu+ in enhancing CO binding strength, and the high-facets, which favor C-C coupling and the ethanol pathway. This method for generating the combined structure can be widely applicable not only for electrochemical catalysts but also in various fields.

Effect of Highly Periodic Au Nanopatterns on Dendrite Suppression in Lithium Metal Batteries.

Despite the extremely high energy density of the lithium metal, dendritic lithium growth caused by nonuniform lithium deposition can result in low Coulombic efficiency and safety hazards, thereby inhibiting its practical applications. Here, we report a new strategy for adopting a nanopatterned gold (Au) seed on a copper current collector for uniform lithium deposition. We find that Au nanopatterns enhance lithium metal battery performance, which is strongly affected by the feature dimensions of Au nanopatterns (diameter and height). Ex situ scanning electron microscopy images confirm that this can be attributed to the perfectly selective lithium nucleation and uniform growth resulting from the spatial confinement effect. The spatial arrangement of Au dot seeds homogenizes the Li+ flux and electric field, and the size-controlled Au seeds prevent both seed-/substrate-induced agglomeration and interseed-induced lithium growth, leading to uniform lithium deposition. This dendrite-free lithium deposition results in the improvement of electrochemical performance, and the system showed cyclic stability over 300 cycles at 0.5 mA cm-2 and 200 cycles at 1.0 mA cm-2 (1 mA h cm-2) and a high rate capability. This study provides in-depth insights into the more complicated and diverse seed geometry control of seed materials for the development of high-performance lithium metal batteries.

Unveiling the enhanced electrocatalytic activity at electrochemically synthesized Pt-WOx hybrid nanostructure interfaces.

Here we report a simple synthesis strategy for Pt-WOx hybrid nanostructures using a metal-dissolution-based electrodeposition technique. The hybrid nanostructures demonstrate an excellent catalytic hydrogen evolution reaction performance with an approximately 17 times higher Pt mass activity and a 7.4 times higher turnover frequency than those of commercial Pt catalysts. The enhanced electrocatalytic performance is related to the creation of Pt-WOx interfacial sites.

Polyelemental Nanoparticles as Catalysts for a Li-O2 Battery.

The development of highly efficient catalysts in the cathodes of rechargeable Li-O2 batteries is a considerable challenge. Polyelemental catalysts consisting of two or more kinds of hybridized catalysts are particularly interesting because the combination of the electrochemical properties of each catalyst component can significantly facilitate oxygen evolution and oxygen reduction reactions. Despite the recent advances that have been made in this field, the number of elements in the catalysts has been largely limited to two metals. In this study, we demonstrate the electrochemical behavior of Li-O2 batteries containing a wide range of catalytic element combinations. Fourteen different combinations with single, binary, ternary, and quaternary combinations of Pt, Pd, Au, and Ru were prepared on carbon nanofibers (CNFs) via a joule heating route. Importantly, the Li-O2 battery performance could be significantly improved when using a polyelemental catalyst with four elements. The cathode containing quaternary nanoparticles (Pt-Pd-Au-Ru) exhibited a reduced overpotential (0.45 V) and a high discharge capacity based on total cathode weight at 9130 mAh g-1, which was ∼3 times higher than that of the pristine CNF electrode. This superior electrochemical performance is be attributed to an increased catalytic activity associated with an enhanced O2 adsorbability by the quaternary nanoparticles.

Nanoscale Wrinkled Cu as a Current Collector for High-Loading Graphite Anode in Solid-State Lithium Batteries.

Solid-state lithium batteries have been intensively studied as part of research activities to develop energy storage systems with high safety and stability characteristics. Despite the advantages of solid-state lithium batteries, their application is currently limited by poor reversible capacity arising from their high resistance. In this study, we significantly improve the reversible capacity of solid-state lithium batteries by lowering the resistance through the introduction of a graphene and wrinkle structure on the surface of the copper (Cu) current collector. This is achieved through a process of chemical vapor deposition (CVD) facilitating graphene-growth synthesis. The modified graphene/wrinkled Cu current collector exhibits a periodic wrinkled pattern 420 nm in width and 22 nm in depth, and we apply it to a graphite composite electrode to obtain an improved areal loading average value of ∼2.5 mg cm-2. The surface-modified Cu current collector is associated with a significant increase in discharge capacity of 347 mAh g-1 at 0.2 C when used with a solid polymer electrolyte. Peel test results show that the observed enhancement is due to the improved strength of adhesion occurring between the graphite composite anode and the Cu current collector, which is attributed to mechanical interlocking. The surface-modified Cu current collector structure effectively reduces resistance by improving adhesion, which subsequently improves the performance of the solid-state lithium batteries. Our study can provide perspective and emphasize the importance of electrode design in achieving enhancements in battery performance.

Understanding Reaction Pathways in High Dielectric Electrolytes Using ß-Mo2C as a Catalyst for Li-CO2 Batteries.

The rechargeable Li-CO2 battery has attracted considerable attention in recent years because of its carbon dioxide (CO2) utilization and because it represents a practical Li-air battery. As with other battery systems such as the Li-ion, Li-O2, and Li-S battery systems, understanding the reaction pathway is the first step to achieving high battery performance because the performance is strongly affected by reaction intermediates. Despite intensive efforts in this area, the effect of material parameters (e.g., the electrolyte, the cathode, and the catalyst) on the reaction pathway in Li-CO2 batteries is not yet fully understood. Here, we show for the first time that the discharge reaction pathway of a Li-CO2 battery composed of graphene nanoplatelets/beta phase of molybdenum carbide (GNPs/ß-Mo2C) is strongly influenced by the dielectric constant of its electrolyte. Calculations using the continuum solvents model show that the energy of adsorption of oxalate (C2O42-) onto Mo2C under the low-dielectric electrolyte tetraethylene glycol dimethyl ether is lower than that under the high-dielectric electrolyte N,N-dimethylacetamide (DMA), indicating that the electrolyte plays a critical role in determining the reaction pathway. The experimental results show that under the high-dielectric DMA electrolyte, the formation of lithium carbonate (Li2CO3) as a discharge product is favorable because of the instability of the oxalate species, confirming that the dielectric properties of the electrolyte play an important role in the formation of the discharge product. The resulting Li-CO2 battery exhibits improved battery performance, including a reduced overpotential and a remarkable discharge capacity as high as 14,000 mA h g-1 because of its lower internal resistance. We believe that this work provides insights for the design of Li-CO2 batteries with enhanced performance for practical Li-air battery applications.

Formation of toroidal Li2O2 in non-aqueous Li-O2 batteries with Mo2CT x MXene/CNT composite.

Due to the growing demand for high energy density devices, Li-O2 batteries are considered as a next generation energy storage system. The battery performance is highly dependent on the Li2O2 morphology, which arises from formation pathways such as the surface growth and the solution growth models. Thus, controlling the formation pathway is important in designing cathode materials. Herein for the first time, we controlled the Li2O2 formation pathway by using Mo2CT x MXene on a catalyst support. The cathode was fabricated by mixing the positively charged CNT/CTAB solution with the negatively charged Mo2CT x solution. After introducing Mo2CT x , important battery performance metrics were considerably enhanced. More importantly, the discharge product analysis showed that the functional groups on the surface of Mo2CT x inhibit the adsorption of O2 on the cathode surface, resulting in the formation of toroidal Li2O2 via the solution growth model. It was supported by density functional theory (DFT) calculations that adsorption of O2 on the Mo2CT x surface is implausible due to the large energy penalty for the O2 adsorption. Therefore, the introduction of MXene with abundant functional groups to the cathode surface can provide a cathode design strategy and can be considered as a universal method in generating toroidal Li2O2 morphology.

Selective Functionalization of High-Resolution Cu2O Nanopatterns via Galvanic Replacement for Highly Enhanced Gas Sensing Performance.

Recently, high-resolution patterned metal oxide semiconductors (MOS) have gained considerable attention for enhanced gas sensing performance due to their polycrystalline nature, ultrasmall grain size (~5 nm), patternable properties, and high surface-to-volume ratio. Herein, we significantly enhanced the sensing performance of that patterned MOS by galvanic replacement, which allows for selective functionalization on ultrathin Cu2O nanopatterns. Based on the reduction potential energy difference between the base channel material (Cu2O) and the decorated metal ion (Pt2+), Pt could be selectively and precisely decorated onto the desired area of the Cu2O nanochannel array. Overall, the Pt-decorated Cu2O exhibited 11-fold higher NO2 (100 ppm) sensing sensitivity as compared to the non-decorated sensing channel, the while the channel device with excessive Pt doping showed complete loss of sensing properties.

High-Resolution p-Type Metal Oxide Semiconductor Nanowire Array as an Ultrasensitive Sensor for Volatile Organic Compounds.

The development of high-performance volatile organic compound (VOC) sensor based on a p-type metal oxide semiconductor (MOS) is one of the important topics in gas sensor research because of its unique sensing characteristics, namely, rapid recovery kinetics, low temperature dependence, high humidity or thermal stability, and high potential for p-n junction applications. Despite intensive efforts made in this area, the applications of such sensors are hindered because of drawbacks related to the low sensitivity and slow response or long recovery time of p-type MOSs. In this study, the VOC sensing performance of a p-type MOS was significantly enhanced by forming a patterned p-type polycrystalline MOS with an ultrathin, high-aspect-ratio (∼25) structure (∼14 nm thickness) composed of ultrasmall grains (∼5 nm size). A high-resolution polycrystalline p-type MOS nanowire array with a grain size of ∼5 nm was fabricated by secondary sputtering via Ar(+) bombardment. Various p-type nanowire arrays of CuO, NiO, and Cr2O3 were easily fabricated by simply changing the sputtering material. The VOC sensor thus fabricated exhibited higher sensitivity (ΔR/Ra = 30 at 1 ppm hexane using NiO channels), as well as faster response or shorter recovery time (∼30 s) than that of previously reported p-type MOS sensors. This result is attributed to the high resolution and small grain size of p-type MOSs, which lead to overlap of fully charged zones; as a result, electrical properties are predominantly determined by surface states. Our new approach may be used as a route for producing high-resolution MOSs with particle sizes of ∼5 nm within a highly ordered, tall nanowire array structure.